The ATS two-stage compounding line includes an ATE twin-screw extruder, ASE single-screw extruder and a down-stream pelletining system.
Due to the modular design principle, both relay and PLC controls are available to be applied in the ATS electrical controlling system.
The first stage is to realize the polymers compounding job, the second stage is to extrude the compounds with a lower temperature, then pelletizing through the down-stream cutting system. Combining high-speed and strong-compounding of twin-screw extruder with low-speed, low-temperature and weak-shear of single-screw extruders, it is the first choice when producing with heat-sensitive or shear-sensitive materials.
Help us help you!
Fill out and submit our Recycling Application Worksheet. One of our application engineers will contact you to discuss your application in more detail.
Set up 1 Application:
Enhance and modification, such as PP, PA, PBT, ect. filled with glass fiber or carbon fiber, compounding alloys, and cable material, such as LDPE, HDPE and insulated material.
Set up 2 Application:
Filling and modification, such as PE or EVA filled with CaCO3, talcum powder, titanium pigment or carbon soot. Radiation cross-link material, coated optical fiber cable material, heat-shrinkable pipe material and Thermoplastic elastomer, such as TPR or TPU.
Set up 3 Application:
PVC cable material, sole material, clarity bolt material, medical material, EVA screen material, low-smoke and no-halogen material.