Welcome to Virtus Equipment Direct
Industrial rubber bushing for vibration isolation and shock absorption in the shredder section of Virtus Equipment and ZERMA America ZCS 1400 Shredder Granulator Combinations. 116 mm OD x 68 mm ID x 100 mm length. Absorbs rotor impact loads and reduces vibration transmission. Replace annually as a set with copper bushing (80040356).
The Rubber Bushing 116 x 68 x 100 is an industrial elastomeric vibration isolation component used in the shredder section of the Virtus Equipment and ZERMA America ZCS 1400 Shredder Granulator Combination. This bushing provides vibration damping and shock absorption between rotating and stationary components in the shredder section, reducing the transmission of high-impact shredder rotor loads to the machine frame and protecting adjacent bearing housings from impact fatigue. It works as a paired set with the copper bushing (80040356) — the rubber bushing provides vibration isolation and shock absorption while the copper bushing provides the low-friction sliding bearing surface. Both bushing types should be replaced annually as a set to maintain the designed vibration damping and shaft support characteristics of the assembly. Consult your machine’s parts documentation to confirm the correct quantity.
| Weight | 6 lbs |
|---|---|
| Dimensions | 5 × 5 × 4 in |
SKU: 80050779
Outside Diameter (OD): 116 mm
Inside Diameter (ID): 68 mm
Length: 100 mm
Material: Rubber (elastomer)
Application: ZCS 1400 Shredder Granulator Combination -- shredder section
Replacement Interval: Annually -- replace as a set with copper bushing 80040356
HTS Code: 8483.50.90.00 (consult a licensed customs broker before commercial filing)
Vibration Isolation: Elastomeric rubber construction absorbs high-impact shredder rotor loads and reduces vibration transmission to the machine frame, protecting the frame and adjacent bearing housings from impact fatigue.
Annual Replacement Scheduled Item: Replace as part of the ZCS 1400 annual preventive maintenance interval together with the paired copper bushing (80040356).
Paired with Copper Bushing: Works as a matched set with the copper bushing (80040356) in the same assembly position. Always replace both bushings together at the same service interval.
Used in the shredder section of the Virtus Equipment and ZERMA America ZCS 1400 Shredder Granulator Combination. Replace annually as a paired set with copper bushing (80040356). Consult your machine’s parts documentation to confirm the correct quantity.
Compatible Machines: Virtus Equipment SG 1400 and ZERMA America ZCS 1400 Shredder Granulator Combination -- shredder section
Replace Together With: Copper Bushing 68 x 63 x 100 (SKU 80040356)
