Welcome to Virtus Equipment Direct
Genuine preventive maintenance kit for the Virtus Equipment H 60-80 and ZERMA America GSH 600/800 heavy duty granulator with 5-knife rotor configuration. Includes all cutting, fastening, power transmission, bearing, sealing, filtration, and lubrication components — rotor knives, stator knives, block knives, backing plates, V-belts, bearings, seals, filter bags, and bearing grease. Available with screen hole diameters of 6mm, 8mm, 10mm, 12mm, 15mm, and 20mm. Save over 10% compared to individual component pricing when you order as a kit.
The H 60-80 and GSH 600/800 Granulator 5-Knife Preventive Maintenance Kit contains all scheduled maintenance components for the 5-knife rotor configuration of the Virtus Equipment H 60-80 and ZERMA America GSH 600/800 heavy duty central granulator. Save over 10% compared to individual component pricing when you order as a kit.
This kit covers: rotor knife replacement and related hardware, stator knife replacement and related hardware, block knife replacement and related hardware, screen replacement, drive belt replacement, bearing and seal replacement, filter bag replacement, and bearing lubrication.
| Weight | 839.6 lbs |
|---|---|
| Dimensions | 45 × 40 × 21 in |
Machine Compatibility: Virtus Equipment H 60-80 and ZERMA America GSH 600/800 Heavy Duty Granulator
Rotor Configuration: 5-Knife Rotor
Screen Hole Diameter Options: 6mm, 8mm, 10mm, 12mm, 15mm, 20mm (select at time of purchase)
Kit Price: $8,810 (save over 10% compared to individual component pricing)
Rotor Knives (SKU 80000920): Qty 10 | 385 x 100 x 22 mm | D2 tool steel (1.2379) | 58 to 62 HRC | 16.0 lbs each
Rotor Fixing Bolts (SKU 80011352): Qty 30 | M20 x 60 mm Cap Head | 1.5 lbs each
Rotor Washers (SKU 80010780): Qty 30 | M20 Thin Flat Washer | 1.5 lbs each
Backing Plates (SKU 80001500): Qty 10 | D2 tool steel (1.2379) | 58 to 62 HRC | 12.0 lbs each
Stator Knives (SKU 80001070): Qty 2 | 795 x 100 x 22 mm | D2 tool steel (1.2379) | 58 to 62 HRC | 27.0 lbs each
Stator Fixing Bolts (SKU 80010160): Qty 16 | M20 x 65 mm | Hex Head | 1.5 lbs each
Stator Washers (SKU 80010780): Qty 16 | M20 Thin Flat Washer | 1.5 lbs each
Block Knives (SKU 80001340): Qty 2 | 392 x 100 x 28 mm | D2 tool steel (1.2379) | 58 to 62 HRC | 19.0 lbs each
Block Fixing Bolts (SKU 80010180): Qty 6 | M20 x 70 mm | Hex Head | 1.5 lbs each
Block Washers (SKU 80010780): Qty 6 | M20 Thin Flat Washer | 1.5 lbs each
Screen (SKU H6080S): Qty 1 | 6mm, 8mm, 10mm, 12mm, 15mm, or 20mm hole diameter
V-Belts (SKU 80002570): Qty 5 | SPC 4000 | 8.0 lbs each
Bearings (SKU 80002980): Qty 2 | 22324/W33 Spherical Roller Bearing | 53.0 lbs each
Seals (SKU 80004040): Qty 4 | 150 x 180 x 15 mm | 2.5 lbs each
Filter Bags (SKU 80012860): Qty 12 | 12 in flat x 160 in long | 4.0 lbs each
Bearing Grease (SKU SKFLGMT3/04GREASE): Qty 1 | SKF LGMT 3/0.4 | 420ml | NLGI Grade 3 | 4.0 lbs
Shipping: Ships on 2 pallets (40×45). Total weight 574 lbs.
Complete Single-Interval Kit: Rotor knives, stator knives, block knives, backing plates, fixing bolts, washers, screen, V-belts, bearings, seals, filter bags, and bearing grease all in one order.
Discounted Kit Pricing: Save over 10% compared to individual component pricing when you order as a kit.
Screen Hole Diameter Options: Available with screens in 6mm, 8mm, 10mm, 12mm, 15mm, or 20mm hole diameters. Select at time of purchase.
D2 Tool Steel Cutting Components: Rotor knives, stator knives, block knives, and backing plates manufactured from D2 tool steel (1.2379), heat treated to 58 to 62 HRC.
Kit Contents:
1x Screen (SKU H6080S) — Available in 6mm, 8mm, 10mm, 12mm, 15mm, or 20mm hole diameter: Precision-perforated granulator screen for the H 60-80 and GSH 600/800 cutting chamber. Select the screen hole diameter at the time of purchase to match your regrind specification.
10x Rotor Knife (SKU 80000920) — 385 x 100 x 22 mm: Precision-ground rotor knives manufactured from D2 tool steel (material 1.2379), heat treated to 58 to 62 HRC. The 5-knife rotor requires 10 rotor knives per full replacement set.
30x Washer M20 Thin (SKU 80010780): M20 thin flat washers used at each rotor knife fixing bolt position. Three washers are included per rotor knife position.
10x H 60-80 and GSH 600/800 Backing Plate (SKU 80001500): Precision-ground backing plates manufactured from D2 tool steel (1.2379), heat treated to 58 to 62 HRC. One backing plate is required per rotor knife position. Each backing plate weighs 12.0 lbs.
2x Stator Knife (SKU 80001070) — 795 x 100 x 22 mm: Precision-ground stator knives manufactured from D2 tool steel (material 1.2379), heat treated to 58 to 62 HRC. Two stator knives are required per full replacement set.
16x Fixing Bolt M20 x 65 (SKU 80010160): High-strength M20 x 65 mm hex head bolts used to secure stator knives to the stator knife holder. Sixteen fixing bolts are required per stator knife set.
30x Fixing Bolt M20 x 60 Cap Head (SKU 80011352): M20 x 60 mm cap head (socket head) bolts used to secure rotor knives to the knife holders. Three fixing bolts are required per rotor knife position.
16x Washer M20 Thin (SKU 80010780): M20 thin flat washers used at each stator knife fixing bolt position.
2x Block Knife (SKU 80001340) — 392 x 100 x 28 mm: Precision-ground block knives manufactured from D2 tool steel (material 1.2379), heat treated to 58 to 62 HRC. Two block knives are required per full replacement set. Each block knife weighs 19.0 lbs.
6x Fixing Bolt M20 x 70 (SKU 80010180): High-strength M20 x 70 mm hex head bolts used to secure block knives to the block knife holder. Six fixing bolts are required per block knife set.
6x Washer M20 Thin (SKU 80010780): M20 thin flat washers used at each block knife fixing bolt position.
6x DIN 934 Nut M20 (SKU 80010490): Standard metric hex nuts used with the M20 x 65 adjusting bolts (20014100) to secure and position the block knives. Six nuts are required per maintenance interval.
6x Adjusting Bolt M20 x 65 Hex Head 10.9 (SKU 20014100): Grade 10.9 hex head adjusting bolts for precise block knife positioning. Used together with M20 nut (80010490) to set the correct block knife clearance. Six bolts are required per maintenance interval.
20x Adjusting Bolt Flat Hex Head M16 x 40 10.9 (SKU 20031700): Flat countersunk hex head bolts for the block knife assembly. The flat head profile sits flush in the mounting surface. Twenty bolts are required per maintenance interval.
2x 22324/W33 Spherical Roller Bearing (SKU 80002980): Heavy-duty double-row self-aligning spherical roller bearings for the granulator rotor shaft. Two bearings are required per full replacement set.
4x 150 x 180 x 15 Seal (SKU 80004040): Industrial-grade rotary shaft seals preventing lubricant leakage and protecting bearings from contamination.
5x V-Belt SPC 4000 (SKU 80002570): Heavy-duty SPC-profile drive belts transmitting motor power to the granulator rotor. The H 60-80 and GSH 600/800 require 5 SPC 4000 belts per set.
12x Filter Bag 12″ Flat x 160″ Long (SKU 80012860): Industrial-grade large-capacity dust collection filter bags. Twelve bags are included per kit.
1x SKF LGMT 3/0.4 Bearing Grease Cartridge (SKU SKFLGMT3/04GREASE): Mineral oil-based lithium soap grease with NLGI Grade 3 consistency. Temperature rated from -30 degrees C to +120 degrees C.
For questions about kit contents, screen selection, or compatibility, contact Virtus Equipment or ZERMA America directly.
Compatible with Both Brand Platforms: All components confirmed compatible with both the Virtus Equipment H 60-80 and ZERMA America GSH 600/800.
