Replacement granulator screen for ZERMA America GSC 700/1000 and Virtus Equipment C 70-100 compact soundproofed granulators. The screen hole size directly controls the maximum output particle dimension. Material circulates in the cutting chamber until it passes through the screen perforations. Select your required hole size from the dropdown menu to match your downstream process requirements. Precision-manufactured to OEM specifications for guaranteed fitment and consistent regrind quality.
The GSC 700/1000 / C 70-100 Granulator Screen is an OEM-specification replacement screen for GSC 700/1000 Compact Soundproofed Granulator and C 70-100 Compact Soundproofed Granulator. The shredder/granulator screen controls the maximum output particle size. Material continues to circulate through the cutting chamber until it is small enough to pass through the screen perforations, ensuring consistent, controlled output for downstream processing or further size reduction.
The GSC 700/1000 / C 70-100 is a compact soundproofed granulator with a 700 mm diameter rotor at 1000 mm width, housed within a complete sound dampening enclosure for quiet operation. The completely welded cutting chamber uses V-cut rotor technology, and the cutting geometry allows even voluminous materials to be processed. Despite its soundproofed housing, the machine provides easy and quick access to the cutting chamber for knife changes, screen changes, and maintenance. The GSC 700 / C 70 series is primarily used as a central granulator for processing large injected or blow-molded products as well as film.
Regular screen inspection and timely replacement are essential for maintaining consistent output quality and protecting the cutting chamber. Worn or enlarged holes allow oversized particles to pass and reduce regrind quality. Cracked or deformed screens should be replaced immediately to prevent damage to the rotor and cutting chamber components.
| Weight | 56 lbs |
|---|---|
| Dimensions | 29 × 32 × 16 in |
Machine Compatibility: GSC 700/1000 (ZERMA America) | C 70-100 (Virtus Equipment)
Screen Type: Compact soundproofed granulator screen
Available Hole Sizes: 6mm | 8mm | 10mm | 12mm
Rotor Diameter: 700 mm
Rotor Width: 1000 mm
Applications: Large injection molded and blow molded parts, film, production scrap; central and inline granulation
GSC 700/1000 / C 70-100 Specific Fitment: Manufactured to the exact dimensions required for the GSC 700/1000 / C 70-100 cutting chamber for guaranteed OEM-specification fitment.
Particle Size Control: Screen hole size directly determines the maximum output particle dimension. Material cannot exit the cutting chamber until it is reduced below the hole diameter.
Wide Hole Size Selection: Available in 6mm, 8mm, 10mm, and 12mm configurations; select from the dropdown menu to match your regrind specification and downstream requirements.
Precision Manufacture: Screen holes are punched or drilled to exact dimensional tolerances for consistent, repeatable output particle sizing across the full screen surface.
Direct OEM Replacement: Precision-manufactured to original equipment specifications for guaranteed fitment and consistent regrind quality performance.
Available Hole Sizes: 6mm, 8mm, 10mm, 12mm
Applications: Central granulation of large injected or blow-molded plastic products, film, and production scrap in recycling and manufacturing facilities. Suitable for inline and central recycling operations where quiet operation is required.
Compatibility: GSC 700/1000 Compact Soundproofed Granulator (ZERMA America) and C 70-100 Compact Soundproofed Granulator (Virtus Equipment)
